TECHNICAL GUIDE

LED Screen Specifications: Wattage, Weight and Thickness

A short guide to reading spec sheets and comparing quotations.

Ask Our Engineers

An LED spec sheet contains numbers that affect power, structure and mounting. The values below are typical approximate ranges — the final reference is always the datasheet of the specific model.

Power Consumption (Wattage)

Two figures are usually listed: maximum and average watts per square metre. Real-world average is often around a third of maximum, because content is rarely full white at full brightness.

  • Indoor screens: maximum typically 300–800 W/m²
  • Outdoor screens: maximum typically 500–1,000 W/m² due to higher brightness

Weight and Thickness

Weight decides how strong the structure, wall or rigging points must be. Lightweight die-cast aluminium cabinets are now the most common.

  • Light indoor cabinets: typically 20–30 kg/m²
  • Outdoor cabinets: typically 25–40 kg/m² depending on protection and frame
  • Thickness: around 30–90 mm for modern cabinets, more for rear-service outdoor screens

Other Key Specifications

When comparing two quotes, check:

  • Brightness (nits): 600–1,200 indoor, 5,000+ outdoor
  • Refresh rate: 3,840 Hz or higher for flicker-free camera filming
  • Protection: IP65 front rating for outdoor screens
  • Service access: front or rear

Frequently Asked Questions

How much power does a 10 m² LED screen use?

At 600 W/m² maximum, peak is about 6 kW and real average around 2 kW. We calculate exact loads from the model datasheet.

Let’s talk about your project

We are here to answer your questions and deliver the best solution for your project or event.